Aerospace, Automotive, & Industrial,

           Hydraulics Pneumatics Fluid Power Workshop Consumables,

                  Fasteners and Tools for the professional workshop

             PLEASE PHONE: 01983 884050 FOR ENQUIRIES
Trend
Brands

 

.
.
.
.
 ..
..
.
.
.
.
...
 
 
 
SecurityMetrics for PCI Compliance, QSA, IDS, Penetration Testing, Forensics, and Vulnerability Assessment
Trend items are stocked by Island Workshop Supplies

Trend


Trend

Trend 46/12 x 1/4 TCT Bearing Guided Ovolo & Round Over 4.8mm Radius Trend 46/12 x 1/4 TCT Bearing Guided Ovolo & Round Over 4.8mm Radius

Trend Bearing Guided Ovolo & Round Over Cutters are ideal for curved work. They can be used on natural timber, man-made particleboard and fibreboa... More Info

£83.72 INC VAT
Trend 46/130 x 1/4 TCT Bearing Guided Ovolo & Round Over 6.3mm Radius Trend 46/130 x 1/4 TCT Bearing Guided Ovolo & Round Over 6.3mm Radius

Trend Bearing Guided Ovolo & Round Over Cutters are ideal for curved work. They can be used on natural timber, man-made particleboard and fibreboa... More Info

£86.11 INC VAT
Trend 46/140 x 1/2 TCT Bearing Guided Ovolo & Round Over 9.5mm Radius Trend 46/140 x 1/2 TCT Bearing Guided Ovolo & Round Over 9.5mm Radius

Trend Bearing Guided Ovolo & Round Over Cutters are ideal for curved work. They can be used on natural timber, man-made particleboard and fibreboa... More Info

£89.28 INC VAT
Trend 46/140 x 1/4 TCT Bearing Guided Ovolo & Round Over 9.5mm Radius Trend 46/140 x 1/4 TCT Bearing Guided Ovolo & Round Over 9.5mm Radius

Trend Bearing Guided Ovolo & Round Over Cutters are ideal for curved work. They can be used on natural timber, man-made particleboard and fibreboa... More Info

£89.28 INC VAT
Trend 46/150 x 1/4 TCT Bearing Guided Ovolo & Round Over 12.7mm Radius Trend 46/150 x 1/4 TCT Bearing Guided Ovolo & Round Over 12.7mm Radius

Trend Bearing Guided Ovolo & Round Over Cutters are ideal for curved work. They can be used on natural timber, man-made particleboard and fibreboa... More Info

£106.08 INC VAT
Trend 46/23 x 1/2 TCT 90° Template Profiler 12.7 x 50mm Trend 46/23 x 1/2 TCT 90° Template Profiler 12.7 x 50mm

Self-guiding cutters with bearings mounted for trimming and bevelling timber, lippings and plastic laminate edges for cabinet making, countertop produ... More Info

£124.98 INC VAT
Trend 46/37 x 1/4 TCT Bearing Guided Chamfer 45° 31.8 x 12mm Trend 46/37 x 1/4 TCT Bearing Guided Chamfer 45° 31.8 x 12mm

These types of cutters are used for edging work and chamfer cutting on man made fibre boards, natural timbers and plastics. Tools are offered to produ... More Info

£101.63 INC VAT
Trend 46/38 x 1/2 TCT Bearing Guided Chamfer 45° 50 x 19mm Trend 46/38 x 1/2 TCT Bearing Guided Chamfer 45° 50 x 19mm

These types of cutters are used for edging work and chamfer cutting on man made fibre boards, natural timbers and plastics. Tools are offered to produ... More Info

£131.81 INC VAT
Trend 46/390 x 1/2 TCT Bearing Guided Rebater 22.5mm x 50.8mm Trend 46/390 x 1/2 TCT Bearing Guided Rebater 22.5mm x 50.8mm

This Trend 46/390x1/2TC Large Guided Rebater is bearing guided for straight curved work. It is for use with portable or stationary routers and is supp... More Info

£144.12 INC VAT
Trend 46/44 x 1/4 TCT Bearing Guided Rebater 24mm x 12.7mm Trend 46/44 x 1/4 TCT Bearing Guided Rebater 24mm x 12.7mm

This Trend 46/44 Rebater includes different size bearings for a choice of rebates, they provide easy set up and, accurate, depth of cut.This set is id... More Info

£106.08 INC VAT
Trend 46/80 x 1/4 TCT 90° Bearing Guided Triple Flute Cutter 12.7 x 25.4mm Trend 46/80 x 1/4 TCT 90° Bearing Guided Triple Flute Cutter 12.7 x 25.4mm

Self-guiding triple flute cutters provide a super fine finish and longer life. Suitable for laminate or plywood overlay.An industrial profiling tool f... More Info

£51.47 INC VAT
Trend 46/91 x 1/4 TCT 90° Shank Mounted Template Profiler 12.7 x 9.5mm Trend 46/91 x 1/4 TCT 90° Shank Mounted Template Profiler 12.7 x 9.5mm

Profilers with shank mounted bearings for guidance, for use with router mounted above or below a table when following a template. Bearing guided cutte... More Info

£55.06 INC VAT
Trend 46/95 x 1/4 TCT 90° Shank Mounted Template Profiler 12.7 x 25.4mm Trend 46/95 x 1/4 TCT 90° Shank Mounted Template Profiler 12.7 x 25.4mm

Profilers with shank mounted bearings for guidance, for use with router mounted above or below a table when following a template. Bearing guided cutte... More Info

£60.37 INC VAT
Trend 47/4 x 1/4 TCT Pierce & Trim Cutter 6.3 x 18mm Trend 47/4 x 1/4 TCT Pierce & Trim Cutter 6.3 x 18mm

This Trend 47/4 x 1/4 TCT Pierce & Trim Cutter will pierce and cut out an aperture in laminate worktops. The base of the cutter acts as a guide fo... More Info

£38.05 INC VAT
Trend 5/1 x 1/4 TCT Hinge Recessor 12.7 x 19mm Trend 5/1 x 1/4 TCT Hinge Recessor 12.7 x 19mm

Two flute TC cutter giving good chip clearance. Ideal for shallow lateral routing cuts such as recessing hinges.Corners will require final trimming sq... More Info

£42.53 INC VAT
Trend 50/05 x 8mm HSSE Helical Plunge Bit 5mm Trend 50/05 x 8mm HSSE Helical Plunge Bit 5mm

Tooling for use on webbed aluminium and UPVC extrusions by window and door fabricators. Cutters are produced in special high speed steel (HSSE) to ens... More Info

£31.27 INC VAT
Trend 50/06 x 8mm HSSE Helical Plunge Bit 6mm Trend 50/06 x 8mm HSSE Helical Plunge Bit 6mm

Tooling for use on webbed aluminium and UPVC extrusions by window and door fabricators. Cutters are produced in special high speed steel (HSSE) to ens... More Info

£34.66 INC VAT
Trend 50/08 x 8mm HSSE Helical Plunge Bit 8mm Trend 50/08 x 8mm HSSE Helical Plunge Bit 8mm

Tooling for use on webbed aluminium and UPVC extrusions by window and door fabricators. Cutters are produced in special high speed steel (HSSE) to ens... More Info

£31.27 INC VAT
Trend 50/19 x 8mm HSSE Steel Helical Plunge Bit 5mm Trend 50/19 x 8mm HSSE Steel Helical Plunge Bit 5mm

Tooling for use on webbed aluminium and UPVC extrusions by window and door fabricators. Cutters are produced in special high speed steel (HSSE) to ens... More Info

£48.04 INC VAT
Trend 50/51 x 8mm HSSE Helical Plunge Bit 8mm Trend 50/51 x 8mm HSSE Helical Plunge Bit 8mm

Tooling for use on webbed aluminium and UPVC extrusions by window and door fabricators. Cutters are produced in special high speed steel (HSSE) to ens... More Info

£51.35 INC VAT
Trend 63127 Collet Sleeve 6.35mm to 12.7mm Trend 63127 Collet Sleeve 6.35mm to 12.7mm

Trend collet reduction sleeve, used to reduce the collet size to take cutters with smaller shanks. Should only be used as a stop-gap, as the correct s... More Info

£18.64 INC VAT
Trend 8127 Collet Sleeve 8mm to 12.7mm Trend 8127 Collet Sleeve 8mm to 12.7mm

Trend collet reduction sleeve, used to reduce the collet size to take cutters with smaller shanks. Should only be used as a stop-gap, as the correct s... More Info

£18.64 INC VAT
Trend AIR STEALTH Half Mask Medium/Large Trend AIR STEALTH Half Mask Medium/Large

The Trend AIR STEALTH Half Mask has a low-profile ergonomic design that offers less breathing resistance. Manufactured from high-grade materials, odou... More Info

£24.26 INC VAT
Trend AIR STEALTH Half Mask Small/Medium with P3 Filters Trend AIR STEALTH Half Mask Small/Medium with P3 Filters

The Trend AIR STEALTH Half Mask has a low-profile ergonomic design that offers less breathing resistance. Manufactured from high-grade materials, odou... More Info

£24.26 INC VAT
Trend AIR STEALTH P3 Filter 1 Off Pair Trend AIR STEALTH P3 Filter 1 Off Pair

Pair of P3(R) filters for AIR STEALTH half mask with Twin HEPAC* pleat encapsulated design filter provides 99.99% filtration of airborne particles and... More Info

£15.34 INC VAT
Trend AIR STEALTH P3(R) Nuisance Filter 1 Off Pair Trend AIR STEALTH P3(R) Nuisance Filter 1 Off Pair

Pair of P3(R) Nuisance Odour Filters for AIR STEALTH half mask. The Twin HEPAC* pleat encapsulated design provides 99.99% filtration of airborne parti... More Info

£18.14 INC VAT

Previous Page
Next Page


[1][2][3][4][5][6][7][8][9]
Last Viewed

 
 
  Terms & Conditions  
Powered By TABS For Tools Payments by Worldpay
We Accept Visa, Mastercard,Switch,Maestro,Solo,Visa Electron and Detla.

© 2025 Island Workshop Supplies
Saturday 19th July 2025