Aerospace, Automotive, & Industrial,

           Hydraulics Pneumatics Fluid Power Workshop Consumables,

                  Fasteners and Tools for the professional workshop

             PLEASE PHONE: 01983 884050 FOR ENQUIRIES

Sgm494 Electrically Insulating Silicone Grease 50g Tube

 

.
.
.
.
 ..
..
.
.
.
.
...
 
 
 
SecurityMetrics for PCI Compliance, QSA, IDS, Penetration Testing, Forensics, and Vulnerability Assessment
SGM494 Electrically Insulating Silicone Grease 50g tube
TitleEx. VATInc. VATQtyBuy
SGM494 Electrically Insulating Silicone Grease 50g tube£7.47£8.96
Click For Bigger Image
Product Code: IWSSGM494
 
SGM494 is water-repellent, work-stable, non-melting, tasteless and odourless silicone grease for electrical insulation purposes; it may also be used for potable water supplies.
 
Key Features
  • Work stable after 24 hours at 200¨C
  •  Non-melting
  •  Low bleed and weight loss
  •  Low level of toxicity

 Typical Applications

It is a very versatile grease that has been used successfully in many applications such as:
- Sealing electrical systems against water ingress
- Prevention of corona discharge
- Protection of insulation against corona discharge
- Potting of small electronic components
- Lubrication of electric cables through conduits
- Screw threads lubrication to prevent sticking and corrosion
- Packing of mineral fibre glands to prevent sticking
- Laboratory stop-cock lubrication
- Vacuum sealing of ground glass joints
 
Effect on Materials
SGM494 has little effect on metals and most plastics. It may, after prolonged contact with plasticised rubbers and plastics, have a slight effect due to plasticiser migration.
 
General Characteristics
The following are typical values for the product and should not be taken as specification limits.
Rheology                                             Paste
Colour                                                 Translucent
Specific Gravity                                    1.00
Unworked Penetration,
(cone weight g) mm/10t                         190-250
Worked Penetration,
(cone weight g) mm/10t                         190-300

 

Note: All penetration values have been measured according to Petroleum Standard IP50/69 or ASTM-D217-68

Water Potable                                       Yes
Weight Loss, 30 hours/ 200¨C, %           1.5
Bleed, 30 hours / 200¨C, %                     <6
Minimum working temperature ¨C            -50
Maximum working temperature ¨C           200
Thermal Conductivity w/mK
 
Electrical Properties
Dielectric Strength at 1MHz, kV/mm       19.5
Dielectric Constant at 1MHz (BS 2067)     2.9
Volume Resistivity, ¥Ø.cm (BS 6233)       1.0E+15
Power Factor at 1MHz (BS 2067)             1.5E-3
Dielectric Breakdown Voltage kV

Health and Safety

Detailed advice for the safe handling and disposal is given in the individual product Material Safety Data Sheets, available on request.

Storage and Shelf Life

SGM494 grease should be stored in its original sealed containers to prevent contamination of the product. If stored in its original sealed containers it is virtually unaffected by storage temperatures and will be stable under such conditions for 24 months.

 



 
 
  Terms & Conditions  
Powered By TABS For Tools Payments by Worldpay
We Accept Visa, Mastercard,Switch,Maestro,Solo,Visa Electron and Detla.

© 2024 Island Workshop Supplies
Wednesday 25th December 2024